Wooden pallets, one of the most important parts of transportation, are products that can be adjusted to the desired height from the ground and loaded on them. In order to use these products, the pallet is first placed on a flat surface. The products suitable for their dimensions are loaded on the pallet. It is important here that the products are placed in a certain order. Then the product is lifted with the help of a pallet and taken to the area where it will be transported. The load can be unloaded on the pallet or left on the pallet.

Considerations in Choosing Wooden Pallets

When choosing wooden pallets for transportation or storage, you should be careful to find the most suitable pallet. It will not be possible to transport with pallets that do not comply with the correct standards. For this reason, you must first be sure of the quality of the timber your pallet company uses. Our company, which is a Başiskele pallet company, produces pallets with timber that meets all standards.

After you are sure of the timbers, you should pay attention to the dimensions of the pallet you will choose. You can have custom pallets produced for you, or you can choose standard pallets. However, the most important criterion here is the size of the products you will carry.

Products that can be used for transportation and storage

There are different products that can be preferred for transportation and storage. Although the purpose of use of these products is the same, the conditions offered are not the same.

• Wooden Pallets: Yüklerin taşınmasını ve depolanmasını sağlayan bu ürün genellikle forklift ya da taşıma çatalı ile kullanılır. Üzerine yükleme yapılan paletlerin ekstra korunması için plastik ya da metal kullanılır.
• Wooden Crates: Wooden crates are crates that can be produced in various sizes. The products to be transported are placed in the crate. No extra protection is applied to these products that provide maximum protection. It can be transported by crane or forklift.

How is Wooden Pallet Produced?

Certain steps are followed in the production of wooden pallets. Before the pallet is produced, the produced timber is checked for conformity. Timbers that meet all standards are selected and the cutting process is carried out without any damage. If there is a cut-related damage to the cut timber, that timber is not used.

After the timbers are cut according to the dimensions, the joining process is started. Nails used in joining are corrugated or specially developed threaded nails. Thus, the possibility of the timbers splitting from each other is minimized. After the whole assembly process, the pallets are ready to use.